Command Entry: SURFPATCH
← Prev | ↑ Chapter | Next → | Index | Symbols
Command Entry: SURFPATCH
Name
SURFPATCH
Aliases
None.
Synopsis
Creates a new surface by fitting a cap over a surface edge that forms a closed loop.
Options
Chain / Curves / Continuity / Bulge magnitude / Guides
Argument Sequence
Select the surface edges or curves forming a closed loop; accept the patch surface; specify the continuity value (default G0); enter the bulge magnitude value between 0 and 1 (default 0.5); and optionally add guide curves or points to shape the surface.
Description
Creates a new surface by fitting a cap over a surface edge that forms a closed loop. The command generates a patch surface spanning selected edges and allows optional guide curves for additional constraint. Surface continuity and bulge magnitude can be specified, with associativity maintained if the SURFACEASSOCIATIVITY system variable is enabled.
Category
3d
Availability
- AutoCAD, all versions: documented.
- BricsCAD: not documented.
- clautolisp: Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log.
Compatibility
AutoCAD all only. BricsCAD: not present.
clautolisp
Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log. Support tier: package-specific – one vendor's surface; specified and classified, not scheduled for implementation.