Command Entry: POINTCLOUDFITPLANAR
← Prev | ↑ Chapter | Next → | Index | Symbols
Command Entry: POINTCLOUDFITPLANAR
Name
POINTCLOUDFITPLANAR
Aliases
None.
Synopsis
Creates a planar surface or a solid from a point cloud point.
Options
Data type / Noisy / Regular / Solid mode / Disable / Enable / Mode / rectangle / contour / solid / adJust borders / Stitch surfaces / Fit tolerances / Accept / Decline / Undo / Switch Bubbles / Select Opening
Argument Sequence
Select seed point(s) in the point cloud; configure data type, mode (rectangle/contour/solid), tolerances and options; Accept or Decline. Works in model view and bubble view modes.
Description
The POINTCLOUDFITPLANAR command searches a point cloud for dense sets of planar points around selected seed point(s) and generates planar surfaces or solids. It enables creation of multiple surfaces or solids sequentially and operates in both model view and bubble view modes.
Category
3d
Availability
- AutoCAD: not documented.
- BricsCAD V25: documented.
- clautolisp: Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log.
Compatibility
BricsCAD V25 only. AutoCAD: not present.
clautolisp
Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log. Support tier: package-specific – one vendor's surface; specified and classified, not scheduled for implementation.