Command Entry: PARAMETRICROTATE

← Prev | ↑ Chapter | Next → | Index | Symbols

Command Entry: PARAMETRICROTATE

Name

PARAMETRICROTATE

Aliases

PROTATE

Synopsis

Defines a parameter to be used by a rotate operation on entities of a parametric block.

Options

Select rotation center point / Select rotation arc start point / Select rotation arc end point / Select/deselect entities / Enter name for the operation parameter / Change Linked behavior

Argument Sequence

Rotation center point; rotation arc start point; rotation arc end point; entity selection; parameter name; Linked behavior setting (ON/OFF).

Description

The PARAMETRICROTATE command enables rotation of entities within a 2D parametric block by specifying a rotation center point and arc endpoints. The rotated entities adjust their positions based on the parameter value, which can be modified through grip points or the Parameters Manager panel.

Category

parametric

Availability

  • AutoCAD: not documented.
  • BricsCAD V25: documented.
  • clautolisp: Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log.

Compatibility

BricsCAD V25 only. AutoCAD: not present.

clautolisp

Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log. Support tier: package-specific – one vendor's surface; specified and classified, not scheduled for implementation.