Command Entry: OPTIMIZE
← Prev | ↑ Chapter | Next → | Index | Symbols
Command Entry: OPTIMIZE
Name
OPTIMIZE
Aliases
None.
Synopsis
Corrects inaccuracies in the drawing, for 2D entities or 3D entities.
Options
change reference Angles / change Tolerances / change Options / change Input selection / apply settings and PReview / Keep selection / switch to 3d Mode / change reference Plane / switch to 2d Mode
Argument Sequence
Select 2D or 3D entities; configure reference angles/planes, tolerances, and correction options; preview and apply. Operates in a 2D mode and a 3D mode.
Description
The OPTIMIZE command fixes drawing imprecisions in 2D entities (lines, arcs, polylines) and 3D entities (solids, regions, surfaces). It performs corrections such as closing small gaps, aligning near-vertical/horizontal/diagonal lines, and making faces coplanar or properly oriented to reference planes.
Category
modify
Availability
- AutoCAD: not documented.
- BricsCAD V25: documented.
- clautolisp: Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log.
Compatibility
BricsCAD V25 only. AutoCAD: not present.
clautolisp
Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log. Support tier: package-specific – one vendor's surface; specified and classified, not scheduled for implementation.