Command Entry: OFFSETEDGE
← Prev | ↑ Chapter | Next → | Index | Symbols
Command Entry: OFFSETEDGE
Name
OFFSETEDGE
Aliases
None.
Synopsis
Creates a closed polyline or spline object that is offset at a specified distance from the edges of a selected planar face on a 3D solid or surface.
Options
Distance / Corner / Sharp / Rounded
Argument Sequence
Selects a planar face on a 3D solid or surface, then specifies a through point or the Distance option (an offset value plus a point indicating the offset side); the Corner option sets Sharp or Rounded corners.
Description
Generates offset geometry from a planar face on a 3D solid or surface; the resulting closed polyline or spline lies on the same plane as the face and can be placed inside or outside the original edges. The offset object can then be used with PRESSPULL or EXTRUDE to create new solids.
Category
modify
Availability
- AutoCAD, all versions: documented.
- BricsCAD: not documented.
- clautolisp: Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log.
Compatibility
AutoCAD all only. BricsCAD: not present.
clautolisp
Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log. Support tier: package-specific – one vendor's surface; specified and classified, not scheduled for implementation.