Command Entry: LOFT

← Prev | ↑ Chapter | Next → | Index | Symbols

Command Entry: LOFT

Name

LOFT

Aliases

None.

Synopsis

Creates a 3D solid or surface in the space between several cross sections.

Options

Mode / Solid / Surface / Guides / Path / Cross sections only / Settings / Continuity / Bulge magnitude / Join multiple edges / Point

Argument Sequence

Select cross-sections in lofting order, then Enter; then an option (Guides/Path/Cross-sections only/Settings) or accept to create the loft.

Description

Creates 3D geometry that passes through a series of cross sections; at least two cross sections must be specified. Guides, a path, and continuity or draft settings control the resulting surface or solid.

Category

3d

Availability

  • AutoCAD, all versions: documented.
  • BricsCAD, all versions: documented.
  • clautolisp: Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log.

Compatibility

AutoCAD all; BricsCAD all.

clautolisp

Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log. Support tier: deferred – in scope eventually, not scheduled now.