Command Entry: DONUT
← Prev | ↑ Chapter | Next → | Index | Symbols
Command Entry: DONUT
Name
DONUT
Aliases
DO, DOUGHNUT
Synopsis
Creates a closed polyline in the shape of a donut (a filled circle or a wide ring).
Options
2 Point / 3 Point / Tangent Tangent Radius / Width / Diameter
Argument Sequence
Supplies the inside diameter, the outside diameter, then one or more center points, terminated by an empty string; e.g. (command "DONUT" inside-dia outside-dia center-pt ""). An inside diameter of 0 makes a filled circle.
Description
A donut is made of two arc polylines joined end-to-end into a ring whose width is set by the inside and outside diameters; if the inside diameter is 0 the donut is a filled circle. The command keeps placing uniform donuts at each specified center point until you press Enter. BricsCAD adds 2-Point, 3-Point, and Tangent-Tangent-Radius construction methods.
Category
draw
Availability
- AutoCAD, all versions: documented.
- BricsCAD, all versions: documented.
- clautolisp: Implemented in the cador host (executed against the drawing model).
Compatibility
AutoCAD all; BricsCAD all.
clautolisp
Implemented in the cador host (executed against the drawing model). Support tier: core-now – in scope for implementation in the cador and cadtui hosts.