Command Entry: BIMSETREFERENCEFACE
← Prev | ↑ Chapter | Next → | Index | Symbols
Command Entry: BIMSETREFERENCEFACE
Name
BIMSETREFERENCEFACE
Aliases
None.
Synopsis
Defines a reference and an opposing face to control the ply layout of a composition.
Options
Select manually
Argument Sequence
Select a reference face, then either accept the suggested opposing face or manually select an opposing face.
Description
Allows users to set a reference face manually by selecting a face on a solid. When the opposing face is parallel to the reference face, the system suggests an opposite face that can be accepted or changed. For compositions with variable thickness plies, the reference and opposing faces may be non-parallel.
Category
3d
Availability
- AutoCAD: not documented.
- BricsCAD V25: documented.
- clautolisp: Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log.
Compatibility
BricsCAD V25 only. AutoCAD: not present.
clautolisp
Not yet implemented: (command …) stops at it, with a "; cador:" notice on the console and no AutoLISP error; the call is recorded on the command log. Support tier: package-specific – one vendor's surface; specified and classified, not scheduled for implementation.