System Variable Entry: SAVEFORMAT

← Prev | ↑ Chapter | Next → | Index | Symbols

System Variable Entry: SAVEFORMAT

Name

SAVEFORMAT

Type

short integer, range 1 to 39 (documented values 1 to 30)

Default

1 (DWG 2018)

Read-Only

no

Scope

user preference; saved in user preference

Description

Save format: Controls the default save format. BricsCAD only. The value selects both the container (DWG / DXF / Binary DXF) and the drawing version:

Value Format Value Format Value Format
1 DWG 2018 11 DXF 2007 21 Binary DXF R14
2 DXF 2018 12 Binary DXF 2007 22 DWG R13
3 Binary DXF 2018 13 DWG 2004 23 DXF R13
4 DWG 2013 14 DXF 2004 24 Binary DXF R13
5 DXF 2013 15 Binary DXF 2004 25 DWG R11/R12
6 Binary DXF 2013 16 DWG 2000 26 DXF R11/R12
7 DWG 2010 17 DXF 2000 27 Binary DXF R11/R12
8 DXF 2010 18 Binary DXF 2000 28 DXF R10
9 Binary DXF 2010 19 DWG R14 29 Binary DXF R10
10 DWG 2007 20 DXF R14 30 DXF R9

Compatibility

BricsCAD only. AutoCAD: not present (AutoCAD's default save format is an Options-dialog / registry preference, not a system variable); BricsCAD V20+.

clautolisp

clautolisp implementation deviation — not part of the normative specification above.

clautolisp honours SAVEFORMAT under a BricsCAD dialect as the default write format when neither the destination extension nor the drawing itself determines one (see CLAUTOLISPDEFAULTDRAWINGFORMAT, the clautolisp cross-dialect equivalent). Both axes are honoured: the container (DWG / DXF / Binary DXF) selects the codec, and the version sets the emitted DXF $ACADVER (e.g. AC1027 for 2013, AC1032 for 2018); the DWG writer converts through libredwg, which carries the version from that $ACADVER.